Logistics and Transportation Checklist
Transportation Planning
The production planner exports open sales orders, finished WOs scheduled to close, and customer-required ship dates from NetSuite or Epicor. Cross-check against the master production schedule so freight is planned around actual close dates, not optimistic ones.
Sort shipments into parcel, LTL, FTL, expedite, or international. Use customer routing guides where required — automotive and aerospace customers will charge back the freight if you ignore their carrier.
Pull the rolling 90-day scorecard: on-time pickup, on-time delivery, claims rate, and invoice accuracy. Drop carriers below 95% OTD from the primary lane until they recover; route critical shipments to the next-best carrier on that lane.
Tender through your TMS (Project44, MercuryGate, or broker portal). Capture PRO numbers and BOL numbers back into the ERP shipment record so customer service can answer status calls without chasing the warehouse.
Inbound Coordination
Buyer pulls the open PO report and pings suppliers whose promise dates put critical raw material at risk of stockout. Flag any past-due POs feeding work centers on this week's schedule for expedite.
Slot inbound trucks against dock door capacity and labor on shift. Avoid stacking 6 trucks at 8 a.m. — receiving misses inspection windows and detention charges accrue.
Receiving clerk matches part number, qty, lot/heat number, and CofC against the PO before signing the BOL. Note shortages, overages, or visible damage on the BOL — once it's signed clean, the carrier claim is dead.
Segregate the affected lot in the hold area with a red tag. Open the NCR in the QMS, notify the buyer for chargeback, and disposition before the material drifts back into the stockroom.
Compliance and Documentation
Print BOL with NMFC freight class, weight, and piece count matching the actual pallets — not what the system thinks. Class disputes and reweighs are the most common LTL invoice exception.
Per 49 CFR Subchapter C: proper shipping name, UN number, hazard class, packing group, and emergency contact on the shipping paper. Verify the shipper signing is current on hazmat training (172.700, every 3 years). Apply correct labels and placards before the carrier arrives — a wrong placard means refused load.
Filing in AES, ECCN classification under EAR (or USML category if ITAR-controlled), HTS code, country of origin, and USMCA certificate of origin where applicable. Customs brokers won't clear without the EEI ITN — get it before the truck rolls.
BOLs, hazmat papers, export filings, and proofs of delivery retained 5 years (DOT) or 7 years (export). Store in document control linked to the shipment record so audits don't turn into archaeology.
Risk and Loss Prevention
Carrier liability under Carmack is often $0.10–$2.00/lb — well below replacement cost on machined parts or electronics. For shipments above the cargo policy deductible, declare value and confirm shipper's interest coverage is in force.
Numbered bolt seal applied at the dock; seal number recorded on the BOL and matched at consignee. C-TPAT customers will require ISO 17712 high-security seals on cross-border loads.
Identify backup carriers per lane, alternate ports for ocean freight, and air-freight conversion thresholds for past-due automotive or medical-device shipments. Document who can authorize the cost premium without waiting for week-end review.
Performance Review
Track on-time delivery, on-time-in-full (OTIF), damage rate, and customer chargebacks by carrier and lane. Walmart, Target, and most automotive Tier-1 customers issue OTIF chargebacks at 1-3% of invoice — visibility before the chargeback hits is the goal.
Reweigh disputes, accessorial creep (lift gate, residential, detention), and class corrections drive 3-7% of LTL spend if unaudited. Dispute exceptions within the carrier's contract window — usually 180 days.
Pull POD comments, customer portal scorecards (SupplyOn, Covisint, customer-specific), and any complaints routed through CS. Tag the signal — late, damaged, wrong qty, paperwork — so the next CAR has data behind it.
Operations manager, supply chain manager, and warehouse lead review the scorecard. Open a CAR for any carrier or lane below threshold; close out last week's actions with effectiveness evidence, not just status updates.
Use this template in Manifestly
- Production Line Setup Checklist
- Cycle Counting Checklist
- Inventory Control Checklist
- Production Planning
- Equipment Maintenance Checklist
- Machine Maintenance Checklist
- Equipment Maintenance Checklist
- Quality Assurance Checklist
- Receiving and Storage Checklist
- Inventory Management
- Employee Onboarding Checklist
- Hazardous Materials Handling Checklist
- Manufacturing Employee Onboarding Checklist
- Machine Safety Checklist
- Regulatory Compliance Checklist
- Project Execution Checklist
- Production Process Audit Checklist
- Personal Protective Equipment (PPE) Checklist
- Project Closure Checklist
- Environmental Compliance Checklist
- Incoming Materials Inspection Checklist
- Workplace Safety Audit Checklist
- Demand Planning Checklist
- Supplier Quality Audit Checklist
- Data Backup and Recovery Checklist
- Energy Efficiency Audit Checklist
- Environmental Compliance Review
- OSHA Compliance Checklist
- Stock Replenishment Checklist
- Root Cause Analysis Checklist
- Kaizen Event Checklist
- Daily Production Checklist
- Production Line Quality Control Checklist
- Preventive Maintenance Checklist
- Finished Goods Quality Assurance Checklist
- ISO 14001 Environmental Management Checklist
- Production Work Order Monitoring Checklist
- Operational Risk Assessment Checklist
- Manufacturing Employee Training Checklist
- IT Systems Maintenance Checklist
- Employee Offboarding Checklist
- Workplace Safety Inspection Checklist
- Six Sigma Project Checklist
- Manufacturing Project Planning Checklist
- Continuous Improvement Checklist
- Electrical Systems Maintenance Checklist
- Manufacturing Cybersecurity Checklist
- Shipping and Receiving Checklist
- ISO 9001 Compliance Checklist
- Manufacturing System Integration Checklist
- Production Operator Performance Evaluation
- Order Fulfillment Checklist
- Fire Safety and Emergency Preparedness Checklist
- NPI Project Initiation Checklist
- Monthly Manufacturing Performance Review
- Manufacturing Waste Management Program
- Manufacturing Regulatory Compliance Checklist
- Sustainability Practices Checklist
- Supplier Evaluation Checklist
- Manufacturing Employee Training Checklist
Ready to take control of your recurring tasks?
Start Free 14-Day TrialUse Slack? Sign up with one click
