Driver Training Program Checklist

Confirm the candidate holds the correct CDL class (A for combination vehicles >26,001 lb GCWR, B for straight trucks) and any endorsements the assigned equipment requires — H (hazmat), N (tank), X (combo), T (doubles/triples). Note restrictions (E no-manual, L air-brake learner, Z partial air). A driver with an L restriction cannot operate a tractor with full air brakes.

Pull the MVR for the issuing state and any state the driver held a license in during the past 3 years (Part 391.23). Flag any DUI, refusal, reckless, suspension, or pattern of moving violations against the carrier's insurance underwriting criteria before continuing.

Full pre-employment query in the FMCSA Drug & Alcohol Clearinghouse before the driver performs any safety-sensitive function. Driver must grant electronic consent. A 'prohibited' status with no completed RTD process disqualifies the driver from operating a CMV.

Send written inquiries to every DOT-regulated employer the candidate worked for in the prior 3 years. Inquiries must be sent within 30 days of hire and responses filed in the DQ file. Missing prior-employer responses is one of the most common DQ-file audit findings.

Use an NRCME-certified medical examiner for the DOT physical (Part 391.41). The pre-employment 5-panel urine drug test (Part 382.301) must be negative before the driver performs any safety-sensitive function. Record the medical card expiration in the DQ tracker.

Walk through the Part 395 limits — 11-hour driving, 14-hour duty, 30-minute break after 8 hours of driving, 60/70-hour weekly, 34-hour restart. Demonstrate the carrier's ELD (Motive, Samsara, Geotab, etc.): duty-status changes, PC and yard-move toggles, edits and annotations, malfunction protocol, and unassigned-driving claims.

Cover the Part 396.11 / 396.13 DVIR requirement and the CVSA out-of-service criteria the driver is most likely to encounter — brake stroke past adjustment limit, tread depth below 4/32" on steers / 2/32" on drives, audible air leaks, inoperative lights, and load securement defects. Emphasize that 'no defects' is a certification, not a default.

Per Part 382.601 the driver must receive written materials on the carrier's policy, prohibited conduct, testing procedures, and consequences. Cover random selection, post-accident testing triggers (49 CFR 382.303), reasonable-suspicion observation, and the driver's Clearinghouse rights. Driver signs the receipt acknowledgment.

Cover the five Smith System keys, following distance for combination vehicles (one second per 10 feet up to 40 mph, plus one second over 40 mph), space management at intersections, and the high-frequency loss types in the carrier's insurance loss runs — typically rear-end, lane change, and backing.

Range exercise with a qualified instructor. Driver demonstrates straight-line backing within boundary lines, offset back left and right, and the GOAL rule (Get Out And Look) at every dock approach. Backing-related incidents are the most frequent low-speed claim type — repetition here pays the highest safety dividend.

Driver demonstrates alley-dock setup, pull-up limits, and a clean 90-degree back into a marked dock. Instructor times the maneuver and counts pull-ups; record both on the range scorecard.

Driver demonstrates the full coupling sequence: chock trailer, line up tractor, back under slowly, tug test against locked trailer brakes, visual under the fifth wheel confirming jaws closed around the kingpin with no gap at the plate, hook gladhands and pigtail, raise landing gear. Most fifth-wheel separations trace back to a skipped tug test or a high hookup.

Run a graduated on-road plan — urban, two-lane rural, mountain or grade if applicable, and night driving. Instructor logs each segment with date, route, miles, and observations. Many carriers target 40+ hours BTW before solo dispatch; the insurance carrier's underwriting may set a specific floor.

Walk the driver through the glove-box accident packet: witness cards, camera/phone photo checklist, scene-diagram template, carrier and insurance phone numbers, and the post-accident drug-test trigger criteria. Drill the dispatcher walk-through call so the driver doesn't make recorded statements to other parties. Cover skid recovery, brake fade on long grades, and runaway-ramp protocol.

Covers HOS, DVIR, securement, hazard recognition, company policy, and accident protocol. Passing threshold per carrier policy (commonly 80%). File the answer key and the graded exam in the training folder.

Use the carrier's Part 391.31 road-test form and the same equipment class the driver will operate. Examiner must hold equivalent or higher qualifications. Issue the Certificate of Driver's Road Test (Part 391.31(e)) and place both the form and the certificate in the DQ file.

Triggered when the driver entered training on a Commercial Learner's Permit. Submit the Part 380 ELDT training record to the FMCSA Training Provider Registry before scheduling — the state will not administer the skills test without it.

For any driver upgrading to a CDL or adding an H, P, S endorsement, submit the Part 380 Subpart F training record to the FMCSA Training Provider Registry by midnight of the second business day after completion. Missing this deadline blocks the driver's skills test.