Start using this Workflow
Machine Maintenance Checklist
Safety Precautions
Ensure the machine is turned off and disconnected from the power source.
Wear appropriate personal protective equipment (PPE) such as gloves and goggles.
Verify that all moving parts have come to a complete stop before beginning maintenance.
Check for any residual energy or pressure in the system and release it safely.
Ensure the work area is clean and free of any hazards or obstructions.
Routine Inspection
Inspect the machine for any visible signs of wear or damage.
Check for any leaks, unusual noises, or vibrations during operation.
Examine belts and chains for proper tension and alignment.
Verify that all safety guards and covers are in place and secure.
Ensure that lubrication levels are adequate and replenish as necessary.
Component Maintenance
Clean filters and replace them if they are clogged or excessively dirty.
Examine electrical connections for signs of wear or looseness and tighten if needed.
Inspect bearings and lubricate or replace them if necessary.
Check hydraulic and pneumatic systems for leaks and ensure proper pressure levels.
Calibrate sensors and controls to ensure accurate operation.
